Product
Wexford Engineered – Harbor Mist | 21488
Width: 7"
Thickness: 1/2"
Inspired by the great castles and villas of Europe, Wexford is crafted with a EuroSawn process that combines the best of the three traditional North American sawing techniques. The result is a wider plank with gorgeous plain sawn near the center, flanked by unique rift and quarter sawn on the edges. Wexford Engineered is a 1/2-inch thick sawn engineered flooring that provides the premium visual of solid flooring with the added stability of engineered construction.
Color: Harbor Mist
Width 7"
Collection | Wexford Engineered |
---|---|
Construction | Sawn Engineered White Oak Hardwood |
Species | White Oak |
Color | Harbor Mist |
Texture | Wirebrushed |
Finish | PPG Ultra Low Gloss Finish |
Edge | Beveled edge / beveled end |
Janka Rating | 1360 |
Origin | Made In USA Of US And Imported Parts |
Width | 7" |
Length | Random board lengths up to 95" |
Thickness | 1/2" |
Finish Warranty | Lifetime finish warranty |
Wear Layer Thickness | 3.0 mm |
Skill Level
![](https://www.mullicanflooring.com/wp-content/uploads/2023/09/skill-level-two-300x23.png)
Level Two
Installation experience
We always recommend professional installation. If you're planning to install these floors yourself, be sure to thoroughly review your installation instructions. Find a professional installer in your area by visiting the National Wood Flooring Association.
Where to install this floor
![](https://www.mullicanflooring.com/wp-content/uploads/2023/09/grade-any-300x165.png)
Any grade
Engineered hardwood floors can be installed at any grade level. It's especially ideal for below-grade spaces like basements.How to install this floor
Floating
Unlike traditional solid hardwood strips, a floating floor isn't nailed down. Instead, the planks are either glued or snapped together, sitting atop a 1/8-inch thick layer of foam layered on the subfloor, but not directly adhered to it.![](https://www.mullicanflooring.com/wp-content/uploads/2023/09/icon-glue-72x300.png)
Glue
This installation method involves gluing your new flooring directly to the subfloor using a hardwood flooring adhesive.![](https://www.mullicanflooring.com/wp-content/uploads/2023/09/icon-staple-229x300.png)
Staple-down
Staple-down installation is utilized for prefinished, engineered hardwood flooring using a narrow-crown stapler to fasten your flooring to wood subfloors.Floor trims & molding
![](https://www.mullicanflooring.com/wp-content/uploads/2023/09/icon-quarter-round-300x254.png)
Quarter round
Quarter round molding is used to cover the expansion space near a wall. Quarter round may also be used with a new or existing base molding.![](https://www.mullicanflooring.com/wp-content/uploads/2023/09/icon-reducer-strip-300x223.png)
Reducer strip
A reducer strip is used as a transition from one flooring to another of a different height.![](https://www.mullicanflooring.com/wp-content/uploads/2023/09/icon-stair-nose-300x132.png)
Stair nose
Stair nose molding is used as a transition on stair steps and sunken dens.![](https://www.mullicanflooring.com/wp-content/uploads/2023/11/icon-t-molding-300x168.png)
T-Molding
T–Molding is used as a transition between two hard surface floors of equal height. A t-mold may be used to bridge wood floor and ceramic tile.![](https://www.mullicanflooring.com/wp-content/uploads/2023/09/icon-threshold-300x212.png)